Racor Single Folding Bike Rack PSB-1R

Racor Single Folding Bike Rack PSB-1R Review

See more picture @ amazon.com

Racor Single Folding Bike Rack PSB-1R Feature

• rack folding bike single bicycle holder storage

Store male or female bikes flat against the wall for maximum use of space. One thing all of our products share is careful attention to design and quality. Made for real world organization solutions the entire range of Racor products are thoroughly tested and made from the highest quality materials available.

Gear Up Grand Stand Single Bike Floor Stand

Gear Up Grand Stand Single Bike Floor Stand Review

Gear Up Grand Stand Single Bike Floor Stand Feature

• 15" x 12" footprint
• Adjustable to fit most tires up to 2.25"
• Engineering-grade ABS molded construction
• Rugged and waterproof

The Gear Up™ Grand Stand™ single bike floor stand offers portable, lightweight storage for storing a bike at home, at the office or in a garage. The engineering-grade ABS molded construction is rugged and waterproof and is adjustable to fit most tires up to 2.25."

Delta Leonardo Single Bicycle Rack with Da Vinci Tire Tray

Delta Leonardo Single Bicycle Rack with Da Vinci Tire Tray Review

Delta Leonardo Single Bicycle Rack with Da Vinci Tire Tray Feature

• Elegantly curved wall-mounted single bike rack
• Accommodates any wheel size; maximum load of 40 pounds
• Great for apartments with limited space
• Silver finish
• Mount to a wall stud; hardware included

Store your bike easily and with a bit of panache with the stylish, curvy Delta Leonardo wall-mounted single bike rack. Elegantly designed with a silver finish, it's perfect for storing a bike in space-limited apartments or in the back hall. The Leonardo holds the front wheel with a rubber coated arm. It conveniently accommodates any wheel size--from touring to phat, chunky mountain tires--and can hold a maximum load of 40 pounds. It should be mounted to a wall stud. It comes with installation hardware, printed instructions, and a lifetime guarantee against defects.

About Delta Cycle
For more than 20 years, Delta Cycle has created useful cycling products with a mission to make an innovative difference. The company works hard to make their products better and deliver superior value. Delta Cycle offers only a small, concentrated product line that represents the best there is in each category.

Stud mounted wall rack to hold 1 bike (includes tray for rear wheel)

Single Bike Storage Rack

Single Bike Storage Rack Review

Single Bike Storage Rack Feature

• Installs in 15 min.
• Steel Components all powder coated
• Hooks slide on bar for easy adjustability

The Single Bike Storage Rack by Monkey Bars is the best solution for storing a professional cycling bike. The Monkey Bars design allows you to store your street or mountain bike horizontally and flat against the wall using the frame of the bike. This bike rack also has space and includes hooks for riding gear, helmet and shoes. The single bike rack is not limited to just street bikes; you can also store mountain bikes or even children's bikes. The Single Bike Rack can be mounted in just 15 minutes and is fully adjustable for easy use. All of Monkey Bar storage racks are made with industrial steel and have an industrial powder coat finish.

Allen Industrial Grade 8-Bike Parking Rack (Single Sided)

Allen Industrial Grade 8-Bike Parking Rack (Single Sided) Review

Allen Industrial Grade 8-Bike Parking Rack (Single Sided) Feature

• Model 208S
• Black powder coat over zinc plated finish offers exceptional corrosion resistance.
• Assembly required ¿ sets up in five minutes.
• Lifetime on workmanship and materials

Designed for schools, businesses, parks, and other public areas, this single-sided rack securely holds eight bicycles upright in vertical sections that are welded into the grid section for strength, rigidity, durability, and protection against bike thieves. With the Allen 200C Connector Kit, this rack can be connected to any other Allen Industrial Grade single-sided rack in any combination to provide the exact parking capacity required. The frame is made of 1-6/10-inch-diameter carbon-steel tubing. Black-powder coating over a zinc-plated finish combines the durability and aesthetic qualities of powder with the corrosion resistance of zinc plating. (The manufacturer says an independent-laboratory test of the finish found no traces of corrosion after 200 hours of salt-spray testing.) The rack measures 95 inches wide x 23 inches deep x 30 inches high. Assembly (instructions included) requires approximately five minutes. The rack carries a lifetime warranty on workmanship and materials.

About Allen Bike Racks
In 1967, after a few years of working on the aerospace technology for the Apollo missions, Dick Allen was out of a job. Government cutbacks led Allen, a Harvard-trained physicist, to transform his garage hobby into a new industry. A cycling enthusiast, inventor, and family man, Allen had a personal need for a bike-carrying device. On weekends, he would take his sons and wife to Cape Cod or the White Mountains of New Hampshire. What proved difficult time and again was the transport of his family’s bicycles. Rather than fight through inconvenience with twine and a dinged car, Allen sought an answer for himself as well as a market in which he foresaw major growth possibilities.

Always a pathfinder, Allen took to work in his Lincoln, Massachusetts garage in search of a more efficient way to transport bikes. Drafting designs during the day and constructing them throughout the night, he put together a model made of electrical conduit, metal strapping, and fire hose casings (for padding). At first, the Allens’ tested the prototype on weekend excursions. Finding the first trunk-mounted rack to be a success, Dick started Allen Bike Racks. Dealer acceptance came quickly, and by 1971 Allen Bike Racks were sold nationally through a number of major bicycle distributors. Today, the company owns over three dozen patents and offers a versatile product line of bike racks while Dick’s son Alex now owns and operates the business. What started out as a small garage run operation now operates three warehouses nationally, two factories abroad, and has products sold in more than a dozen countries around the world.

Industrial Grade 8-Bike Parking Rack (Single Sided)

Racor Pro PSB-1R Single Folding Bike Rack

Racor Pro PSB-1R Single Folding Bike Rack Review

Racor Pro PSB-1R Single Folding Bike Rack Feature

• Wall-mount folding bike rack; supports one bike
• Folds flat when not in use
• Handy shelf for helmet and accessories
• Easy installation with provided hardware
• Solid steel construction and a durable epoxy finish

Store bikes flat against the wall for maximum use of space with this folding bike rack from Racor. Two arms support the frame of the bike upright for reliable storage and easy access. When out of use, the rack folds flat against the wall so no one can bump into it. A handy shelf is a great place to set helmets or bike shoes, and doubles as a light-duty mechanics workstation. Easy for kids to use, the stand is made of sturdy solid steel construction and a durable epoxy finish for optimal durability and corrosion resistance. No assembly required, the stand mounts easily to walls with the included hardware. --Brian D. Olson